Piflufolastat F-18
FDA Drug Information • Also known as: Pylarify
- Brand Names
- Pylarify
- Drug Class
- Radioactive Diagnostic Agent [EPC]
- Route
- INTRAVENOUS
- Dosage Form
- INJECTION
- Product Type
- HUMAN PRESCRIPTION DRUG
Description
11 DESCRIPTION 11.1 Chemical Characteristics PYLARIFY contains fluorine 18 (F 18), radiolabeled prostate-specific membrane antigen inhibitor imaging agent. Chemically piflufolastat F 18 is 2-(3-{1-carboxy-5-[(6-[18F]fluoro-pyridine-3-carbonyl)-amino]-pentyl}ureido)-pentanedioic acid. The molecular weight is 441.4 and the structural formula is: The chiral purity of the unlabeled piflufolastat F 18 precursor is greater than 99% (S,S). PYLARIFY is a sterile, non-pyrogenic, clear, colorless solution for intravenous injection. Each milliliter contains 37 to 2,960 MBq (1 to 80 mCi) piflufolastat F 18 with ≤0.01 µg/mCi of piflufolastat at calibration time and date, and ≤ 78.9 mg ethanol in 0.9% sodium chloride injection USP. The pH of the solution is 4.5 to 7.0. PYLARIFY has a radiochemical purity of at least 95% up to 10 hours following end of synthesis, and specific activity of at least 1000 mCi/µmol at the time of administration. Chemical Structure 11.2 Physical Characteristics PYLARIFY is radiolabeled with fluorine 18 (F 18), a cyclotron produced radionuclide that decays by positron emission to stable oxygen 18 with a half-life of 109.8 minutes. The principal photons useful for diagnostic imaging are the coincident pair of 511 keV gamma photons, resulting from the interaction of the emitted positron with an electron (Table 3). Table 3. Principal Radiation Produced from Decay of Fluorine 18 Radiation Energy (keV) Abundance (%) Positron 249.8 96.9 Gamma 511 193.5 11.3 External Radiation The point source air-kerma coefficient for F 18 is 3.75 × 10 -17 Gy m 2 /(Bq s). The first half-value thickness of lead (Pb) for F 18 gamma rays is approximately 6 mm. The relative reduction of radiation emitted by F 18 that results from various thicknesses of lead shielding is shown in Table 4. The use of 8 cm Pb decreases the radiation transmission (i.e. exposure) by a factor of about 10,000. Table 4. Radiation Attenuation of 511 keV Gamma Rays by Lead Shielding Shield Thickness cm of...
What Is Piflufolastat F-18 Used For?
1 INDICATIONS AND USAGE PYLARIFY is indicated for positron emission tomography (PET) of prostate-specific membrane antigen (PSMA) positive lesions in men with prostate cancer: with suspected metastasis who are candidates for initial definitive therapy. with suspected recurrence based on elevated serum prostate-specific antigen (PSA) level. PYLARIFY is a radioactive diagnostic agent indicated for positron emission tomography (PET) of prostate-specific membrane antigen (PSMA) positive lesions in men with prostate cancer: with suspected metastasis who are candidates for initial definitive therapy. with suspected recurrence based on elevated serum prostate-specific antigen (PSA) level. ( 1 )
Dosage and Administration
2 DOSAGE AND ADMINISTRATION Recommended dose is 333 MBq (9 mCi) with an acceptable range of 296 MBq to 370 MBq (8 mCi to 10 mCi), administered as a bolus intravenous injection. ( 2.2 ) Initiate imaging approximately 60 minutes after PYLARIFY administration. The patient should void immediately prior to initiation of imaging. Image acquisition should start from mid-thigh and proceed to the skull vertex. ( 2.3 , 2.4 ) See full prescribing information for additional preparation, handling, administration, imaging, and radiation dosimetry information. ( 2 ) 2.1 Radiation Safety – Drug Handling PYLARIFY is a radioactive drug. Only authorized persons qualified by training and experience should receive, use, and administer PYLARIFY. Handle PYLARIFY with appropriate safety measures to minimize radiation exposure during administration [see Warnings and Precautions (5.3) ] . Use waterproof gloves and effective radiation shielding, including syringe shields, when preparing and handling PYLARIFY. 2.2 Recommended Dosage and Administration Instructions Recommended Dose The recommended amount of radioactivity to be administered for PET imaging is 333 MBq (9 mCi) with an acceptable range of 296 MBq to 370 MBq (8 mCi to 10 mCi) administered as a single bolus intravenous injection. Preparation and Administration Use aseptic technique and radiation shielding when preparing and administering PYLARIFY. Visually inspect the radiopharmaceutical solution. Do not use if it contains particulate matter or if it is discolored (PYLARIFY is a clear, colorless solution). Calculate the necessary volume to administer based on calibration time and required dose. PYLARIFY may be diluted with 0.9% Sodium Chloride Injection, USP. Assay the dose in a suitable dose calibrator prior to administration. Post Administration Instructions Follow the PYLARIFY injection with an intravenous flush of 0.9% Sodium Chloride Injection USP. Dispose of any unused PYLARIFY in compliance with applicable regulations. 2.3 Patient Preparation Instruct patients to drink water to ensure adequate hydration prior to administration of PYLARIFY and to continue drinking and voiding frequently for the first few hours following administration to reduce radiation exposure [see Warnings and Precautions (5.3) ] . 2.4 Image Acquisition The recommended start time for image acquisition is 60 minutes after PYLARIFY injection. Starting image acquisition more than 90 minutes after injection may adversely impact imaging performance. Patients should void immediately prior to image acquisition. Position the patient supine with arms above the head. Image acquisition should start from mid-thigh and proceed to the skull vertex. Scan duration is 12 minutes to 40 minutes depending on the number of bed positions (typically 6 to 8) and acquisition time per bed position (typically 2 minutes to 5 minutes). 2.5 Image Display and Interpretation PYLARIFY binds to prostate-specific membrane antigen (PSMA). Based on the intensity of the...
Side Effects (Adverse Reactions)
6 ADVERSE REACTIONS The most common reported adverse reactions are headache, dysgeusia, and fatigue. ( 6.1 ) To report SUSPECTED ADVERSE REACTIONS, contact Progenics Pharmaceuticals, Inc. at 1-800-362-2668 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch. 6.1 Clinical Trials Experience Because clinical trials are conducted under widely varying conditions, adverse reaction rates observed in the clinical trials of a drug cannot be directly compared to rates in the clinical trials of another drug and may not reflect the rates observed in practice. The safety of PYLARIFY was evaluated in 593 patients, each receiving one dose of PYLARIFY. The average injected activity was 340 ± 26 MBq (9.2 ± 0.7 mCi). The adverse reactions reported in >0.5% of patients within the studies are shown in Table 2. In addition, a hypersensitivity reaction was reported in one patient (0.2%) with a history of allergic reaction. Table 2. Adverse Reactions with a Frequency >0.5% in Patients Who Received PYLARIFY (n = 593) Adverse Reaction n (%) Headache 13 (2%) Dysgeusia 10 (2%) Fatigue 7 (1%)
Drug Interactions
7 DRUG INTERACTIONS Androgen deprivation therapy and other therapies targeting the androgen pathway Androgen deprivation therapy (ADT) and other therapies targeting the androgen pathway, such as androgen receptor antagonists, may result in changes in uptake of PYLARIFY in prostate cancer. The effect of these therapies on performance of PYLARIFY PET has not been established.
Contraindications
4 CONTRAINDICATIONS None. None. ( 4 )
Pregnancy and Breastfeeding
8.1 Pregnancy Risk Summary PYLARIFY is not indicated for use in females. There is no information on the risk of adverse developmental outcomes in pregnant women or animals with the use of piflufolastat F 18. All radiopharmaceuticals, including PYLARIFY, have the potential to cause fetal harm depending on the fetal stage of development and the magnitude of the radiation dose.
Overdosage
10 OVERDOSAGE In the event of an overdose of PYLARIFY, reduce the radiation absorbed dose to the patient where possible by increasing the elimination of the drug from the body using hydration and frequent bladder voiding. A diuretic might also be considered. If possible, an estimate of the radiation effective dose administered to the patient should be made.
How Supplied
16 HOW SUPPLIED/STORAGE AND HANDLING 16.1 How Supplied PYLARIFY injection is supplied in a 50 mL multiple-dose glass vial (NDC# 71258-022-01) containing a clear, colorless solution at a strength of 37 MBq/mL to 2,960 MBq/mL (1 mCi/mL to 80 mCi/mL) piflufolastat F 18 at calibration time and date. 16.2 Storage and Handling Storage Store PYLARIFY at controlled room temperature (USP) 20°C to 25°C (68°F to 77°F). PYLARIFY does not contain a preservative. Store PYLARIFY in the original container with radiation shielding. The expiration date and time are provided on the container label. Use PYLARIFY within 10 hours from the time of end of synthesis. Handling This preparation is approved for use by persons under license by the Nuclear Regulatory Commission or the relevant regulatory authority of an Agreement State.
About This Information
This drug information is sourced from FDA-approved labeling via the openFDA database. It is intended for educational and reference purposes only. This is not medical advice. Always consult your healthcare provider before making decisions about medication. Drug information may be updated by the FDA; check with your pharmacist for the most current information.
What are side effects?
Side effects are unwanted reactions that can occur when taking a medication. They range from mild (headache, nausea) to severe (allergic reactions, organ damage). Not everyone experiences side effects, and severity varies. Report any concerning side effects to your doctor.
What are drug interactions?
Drug interactions occur when a medication is affected by another drug, food, or supplement. Interactions can make medications less effective or cause dangerous side effects. Always tell your doctor about all medications and supplements you take.