Mercaptopurine

FDA Drug Information • Also known as: Mercaptopurine

Brand Names
Mercaptopurine
Route
ORAL
Dosage Form
SUSPENSION
Product Type
HUMAN PRESCRIPTION DRUG

Description

11 DESCRIPTION Mercaptopurine is a nucleoside metabolic inhibitor, the chemical name is 6H-purine-6-thione, 1,7-dihydro-, monohydrate. The molecular formula is C 5 H 4 N 4 S

  • H 2 O and the molecular weight is 170.20. Its structural formula is: Mercaptopurine is a yellow, crystalline powder. Mercaptopurine is practically insoluble in water and in ether. It has a pKa of 7.8, an average tapped density of 1.0 g/mL and average bulk density of 0.85 g/mL. It dissolves in solutions of alkali hydroxides. Mercaptopurine tablets is available for oral use. Each scored tablet contains 50 mg mercaptopurine and the following inactive ingredients: corn starch, pregelatinized, potato starch, lactose, magnesium stearate and stearic acid. Mercaptopurine-Structure

  • What Is Mercaptopurine Used For?

    1 INDICATIONS & USAGE Mercaptopurine tablets is a nucleoside metabolic inhibitor indicated for treatment of adult and pediatric patients with acute lymphoblastic leukemia (ALL) as part of a combination chemotherapy maintenance regimen. (1.1) 1.1 Acute Lymphoblastic Leukemia Mercaptopurine tablets are indicated for treatment of adult and pediatric patients with acute lymphoblastic leukemia (ALL) as part of a combination chemotherapy maintenance regimen.

    Dosage and Administration

    2 DOSAGE & ADMINISTRATION The recommended starting dose of mercaptopurine tablets is 1.5 mg/kg to 2.5 mg/kg orally once daily as part of a combination chemotherapy maintenance regimen. Adjust dose to maintain desirable absolute neutrophil count and for excessive myelosuppression. (2.1) Renal Impairment : Use the lowest recommended starting dose or increase the dosing interval. (2.3, 8.6) Hepatic Impairment : Use the lowest recommended starting dose. (2.3, 8.7) 2.1 Recommended Dosage The recommended starting dosage of mercaptopurine tablets is 1.5 mg/kg to 2.5 mg/kg orally once daily as part of combination chemotherapy maintenance regimen. A recommended dosage for patients less than 17 kg is not achievable, because the only available strength is 50 mg. Take mercaptopurine tablets either consistently with or without food. After initiating mercaptopurine tablets, monitor complete blood count (CBC) and adjust the dose to maintain absolute neutrophil count (ANC) at a desirable level and for excessive myelosuppression. Evaluate the bone marrow in patients with prolonged myelosuppression or repeated episodes of myelosuppression to assess leukemia status and marrow cellularity. Evaluate thiopurine S-methyltransferase (TPMT) and nucleotide diphosphatase (NUDT15) status in patients with severe myelosuppression or repeated episodes or myelosuppression [see Dosage and Administration (2.2)] . Do not administer to patients who are unable to swallow tablets. If a patient misses a dose, instruct the patient to continue with the next scheduled dose. Mercaptopurine tablets is a cytotoxic drug. Follow special handling and disposal procedures. 2.2 Dosage Modifications in Patients with TPMT and NUDT15 Deficiency Consider testing for TPMT and NUDT15 deficiency in patients who experience severe myelosuppression or repeated episodes of myelosuppression [see Warnings and Precautions (5.1), Clinical Pharmacology (12.5)] . Homozygous Deficiency in either TPMT or NUDT15 Patients with homozygous deficiency of either enzyme typically require 10% or less of the recommended dosage. Reduce the recommended starting dosage of mercaptopurine tablets in patients who are known to have homozygous TPMT or NUDT15 deficiency. Heterozygous Deficiency in TPMT and/or NUDT15 Reduce the mercaptopurine tablets dose based on tolerability. Most patients with heterozygous TPMT or NUDT15 deficiency tolerate the recommended dosage, but some require a dose reduction based on adverse reactions. Patients who are heterozygous for both TPMT and NUDT15 may require more substantial dose reductions. 2.3 Dosage Modifications in Renal and Hepatic Impairment Renal Impairment Use the lowest recommended starting dosage for mercaptopurine tablets in patients with renal impairment (CLcr less than 50 mL/min). Adjust the dosage to maintain absolute neutrophil count (ANC) at a desirable level and for adverse reactions [see Uses in Specific Populations (8.6)] . Hepatic Impairment Use the lowest recommended starting...

    Side Effects (Adverse Reactions)

    6 ADVERSE REACTIONS The following clinically significant adverse reactions are described elsewhere in the labeling: Myelosuppression [see Warnings and Precautions (5.1)] Hepatotoxicity [see Warnings and Precautions (5.2)] Immunosuppression [see Warnings and Precautions (5.3)] Treatment related malignancies [see Warnings and Precautions (5.4)] Macrophage activation syndrome [see Warnings and Precautions (5.5)] The most common adverse reaction (>20%) is myelosuppression, including anemia, leukopenia and thrombocytopenia. Adverse reactions occurring in 5% to 20% of patients include anorexia, nausea, vomiting, diarrhea, malaise and rash. (6.1) To report SUSPECTED ADVERSE REACTIONS, contact Florida Pharmaceutical Products, LLC at 1-800-315-0985 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch 6.1 Clinical Trials Experience Because clinical trials are conducted under widely varying conditions, adverse reaction rates observed in the clinical trials of a drug cannot be directly compared to rates in the clinical trials of another drug and may not reflect the rates observed in practice. Based on multicenter cooperative group ALL trials, the most common adverse reaction occurring in > 20% of patients was myelosuppression, including anemia, neutropenia, lymphopenia and thrombocytopenia. Adverse reactions occurring in 5% to 20% of patients included anorexia, nausea, vomiting, diarrhea, malaise and rash. Adverse reactions occurring in < 5 % of patients included urticaria, hyperuricemia, oral lesions, increased transaminases, hyperbilirubinemia, hyperpigmentation, infections, and pancreatitis. Oral lesions resemble thrush rather than antifolic ulcerations. Delayed or late adverse reactions include hepatic fibrosis, hyperbilirubinemia, alopecia, pulmonary fibrosis, oligospermia and secondary malignancies [see Warnings and Precautions (5.1, 5.2)]. Drug fever has been reported with mercaptopurine. Additional adverse reactions that have been reported in patients who have received mercaptopurine include photosensitivity, hypoglycemia, and portal hypertension. 6.2 Postmarketing Experience The following adverse reactions have been identified during postapproval use of mercaptopurine tablets. Because these reactions are reported voluntarily from a population of uncertain size, it is not always possible to reliably estimate their frequency or establish a causal relationship to drug exposure. These reactions include: intrahepatic cholestasis of pregnancy (ICP).

    Drug Interactions

    7 DRUG INTERACTIONS Allopurinol : Reduce the dose of mercaptopurine tablets when co-administered with allopurinol. (2.4, 7.1) Warfarin : Mercaptopurine tablets may decrease the anticoagulant effect. (7.2) 7.1 Allopurinol Allopurinol can inhibit the first-pass oxidative metabolism of mercaptopurine by xanthine oxidase, which can lead to an increased risk of mercaptopurine adverse reactions (i.e., myelosuppression, nausea, and vomiting) [see Warnings and Precautions (5.1), Adverse Reactions (6.1)] . Reduce the dose of mercaptopurine tablets when coadministered with allopurinol [see Dosage and Administration (2.4)] . 7.2 Warfarin The concomitant administration of mercaptopurine tablets and warfarin may decrease the anticoagulant effectiveness of warfarin. Monitor the international normalized ratio (INR) in patients receiving warfarin and adjust the warfarin dosage as appropriate. 7.3 Myelosuppresive Products Mercaptopurine tablets can cause myelosuppression. Myelosuppression may be increased when mercaptopurine tablets is coadministered with other products that cause myelosuppression. Enhanced myelosuppression has been noted in some patients also receiving trimethoprim-sulfamethoxazole. Monitor the CBC and adjust the dose of mercaptopurine tablets for excessive myelosuppression [see Dosage and Administration (2.1), Warnings and Precautions (5.1)] . 7.4 Aminosalicylates Aminosalicylates (e.g., mesalamine, olsalazine or sulfasalazine) may inhibit the TPMT enzyme, which may increase the risk of myelosuppression when coadministered with mercaptopurine tablets. When aminosalicylates and mercaptopurine tablets are coadministered, use the lowest possible doses for each drug and monitor more frequently for myelosuppression [see Warnings and Precautions (5.1)] . 7.5 Hepatotoxic Products Mercaptopurine tablets can cause hepatotoxicity. Hepatotoxicity may be increased when mercaptopurine tablets is coadministered with other products that cause hepatotoxicity. Monitor liver tests more frequently in patients who are receiving mercaptopurine tablets with other hepatotoxic products [see Warnings and Precautions (5.2)] .

    Contraindications

    4 CONTRAINDICATIONS None. None.

    Pregnancy and Breastfeeding

    8.1 Pregnancy Risk Summary Mercaptopurine tablets can cause fetal harm when administered to a pregnant woman [see Clinical Pharmacology (12.1)] . Pregnant women who receive mercaptopurine have an increased incidence of miscarriage and stillbirth ( see Data ). Advise pregnant women of the potential risk to a fetus. The estimated background risk of major birth defects and miscarriage for the indicated population(s) is unknown. All pregnancies have a background risk of birth defect, loss, or other adverse outcomes. In the U.S. general population, the estimated background risk of major birth defects and miscarriage in clinically recognized pregnancies is 2% to 4% and 15% to 20%, respectively. Data Human Data Women receiving mercaptopurine in the first trimester of pregnancy have an increased incidence of miscarriage; the risk of malformation in offspring surviving first trimester exposure is not known. In a series of 28 women receiving mercaptopurine after the first trimester of pregnancy, 3 mothers died prior to delivery, 1 delivered a stillborn child, and 1 aborted; there were no cases of macroscopically abnormal fetuses. Animal Data Mercaptopurine was embryo-lethal and teratogenic in several animal species (rat, mouse, rabbit, and hamster) at doses less than the recommended human dose.

    8.3 Females and Males of Reproductive Potential Mercaptopurine tablets can cause fetal harm when administered to pregnant women [see Use in Specific Populations (8.1)] . Pregnancy Testing Verify the pregnancy status in females of reproductive potential prior to initiating mercaptopurine tablets [see Use in Specific Populations (8.1)] . Contraception Females Advise females of reproductive potential to use effective contraception during treatment with mercaptopurine tablets and for 6 months after the last dose. Males Based on genotoxicity findings, advise males with female partners of reproductive potential to use effective contraception during treatment with mercaptopurine tablets and for 3 months after the last dose [see Nonclinical Toxicology (13.1)] . Infertility Females and Males Based on findings from animal studies, mercaptopurine tablets can impair female and male fertility [see Nonclinical Toxicology (13.1)] . The long-term effects of mercaptopurine on female and male fertility, including the reversibility have not been studied.

    Overdosage

    10 OVERDOSAGE Signs and symptoms of mercaptopurine overdosage may be immediate (anorexia, nausea, vomiting, and diarrhea); or delayed (myelosuppression, liver dysfunction, and gastroenteritis). Dialysis cannot be expected to clear mercaptopurine. Hemodialysis is thought to be of marginal use due to the rapid intracellular incorporation of mercaptopurine into active metabolites with long persistence. Withhold mercaptopurine tablets immediately for severe or life-threatening adverse reactions occur during treatment. If a patient is seen immediately following an accidental overdosage, it may be useful to induce emesis.

    How Supplied

    16 HOW SUPPLIED/STORAGE AND HANDLING Mercaptopurine tablets are supplied as biconvex, round, pale yellow to buff, scored tablets containing 50 mg mercaptopurine, imprinted with “9|3” available in: bottles of 25 NDC 71921-150-02 bottles of 250 NDC 71921-150-25 Store at 20°C to 25°C (68°F to 77°F); excursions permitted to 15°C to 30°C (59°F to 86°F) [see USP Controlled Room Temperature]. Store in a dry place. Dispense in tight container as defined in the USP. Mercaptopurine tablets is a cytotoxic drug. Follow special handling and disposal procedures.

    About This Information

    This drug information is sourced from FDA-approved labeling via the openFDA database. It is intended for educational and reference purposes only. This is not medical advice. Always consult your healthcare provider before making decisions about medication. Drug information may be updated by the FDA; check with your pharmacist for the most current information.

    What are side effects?

    Side effects are unwanted reactions that can occur when taking a medication. They range from mild (headache, nausea) to severe (allergic reactions, organ damage). Not everyone experiences side effects, and severity varies. Report any concerning side effects to your doctor.

    What are drug interactions?

    Drug interactions occur when a medication is affected by another drug, food, or supplement. Interactions can make medications less effective or cause dangerous side effects. Always tell your doctor about all medications and supplements you take.