Home › Drugs › Belinostat

Belinostat

FDA Drug Information • Also known as: Beleodaq

Brand Names
Beleodaq
Drug Class
Histone Deacetylase Inhibitor [EPC]
Route
INTRAVENOUS
Dosage Form
INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION
Product Type
HUMAN PRESCRIPTION DRUG

Description

11 DESCRIPTION Beleodaq is a histone deacetylase inhibitor with a sulfonamide-hydroxamide structure. The chemical name of belinostat is (2E)- N -hydroxy-3-[3-(phenylsulfamoyl)phenyl]prop-2-enamide. The structural formula is as follows: The molecular formula is C 15 H 14 N 2 O 4 S and the molecular weight is 318.35 g/mol. Belinostat is a white to off-white powder. It is slightly soluble in distilled water (0.14 mg/mL) and polyethylene glycol 400 (about 1.5 mg/mL), and is freely soluble in ethanol (> 200 mg/mL). The pKa values are 7.87 and 8.71 by potentiometry and 7.86 and 8.59 by UV. Beleodaq (belinostat) for injection is supplied as a sterile lyophilized yellow powder containing 500 mg belinostat as the active ingredient. Each vial also contains 1000 mg L-Arginine, USP as an inactive ingredient. The drug product is supplied in a single-dose clear glass vial with a coated stopper and aluminum crimp seal with “flip-off” cap. Beleodaq is intended for intravenous administration after reconstitution with 9 mL Sterile Water for injection, and the reconstituted solution is further diluted with 250 mL of sterile 0.9% Sodium Chloride injection prior to infusion [see Dosage and Administration ( 2) ] . Structure

What Is Belinostat Used For?

1 INDICATIONS AND USAGE Beleodaq is indicated for the treatment of adult patients with relapsed or refractory peripheral T-cell lymphoma (PTCL). This indication is approved under accelerated approval based on tumor response rate and duration of response [ see Clinical Studies ( 14 )]. An improvement in survival or disease-related symptoms has not been established. Continued approval for this indication may be contingent upon verification and description of clinical benefit in the confirmatory trial. Beleodaq is a histone deacetylase inhibitor indicated for the treatment of adult patients with relapsed or refractory peripheral T-cell lymphoma (PTCL). This indication is approved under accelerated approval based on tumor response rate and duration of response. An improvement in survival or disease-related symptoms has not been established. Continued approval for this indication may be contingent upon verification and description of clinical benefit in the confirmatory trial.( 1 )

Dosage and Administration

2 DOSAGE AND ADMINISTRATION Recommended dosage of Beleodaq is 1,000 mg/m 2 administered over 30 minutes by intravenous infusion once daily on days 1 through 5 of a 21-day cycle. Cycles can be repeated until disease progression or unacceptable toxicity. ( 2.1 ) Treatment discontinuation or interruption with or without dosage reductions by 25% may be needed to manage adverse reactions ( 2.2 ) Reduce dosage in patients with moderate hepatic or renal impairment. ( 2.3 , 2.4 , 8.6 , 8.7 ) Avoid use in patients with severe hepatic or renal impairment. ( 2.3 , 2.4 , 8.6 , 8.7 ) Modify dosage in patients known to be homozygous for the UGT1A1*28 allele. ( 2.5 ) See the full prescribing information for preparation and administration instructions. ( 2.7 ) 2.1 Recommended Dosage The recommended dosage of Beleodaq is 1,000 mg/m 2 administered over 30 minutes by intravenous infusion once daily on Days 1 through 5 of a 21-day cycle. Cycles can be repeated every 21 days until disease progression or unacceptable toxicity. 2.2 Dosage Modification for Hematologic and Non-Hematologic Toxicities Table 1 displays the recommended Beleodaq dosage modifications for hematologic and non-hematologic toxicities. Base dosage adjustments for thrombocytopenia and neutropenia on platelet and absolute neutrophil nadir (lowest value) counts in the preceding cycle of therapy.

  • Absolute neutrophil count (ANC) should be greater than or equal to 1 x 10 9 /L and the platelet count should be greater than or equal to 50 x 10 9 /L prior to the start of each cycle and prior to resuming treatment following toxicity. Resume subsequent treatment with Beleodaq according to the guidelines described in Table 1 below. Discontinue Beleodaq in patients who have recurrent ANC nadirs less than 0.5 x 10 9 /L and/or recurrent platelet count nadirs less than 25 x 10 9 /L after two dosage reductions.
  • Other toxicities must be NCI-CTCAE Grade 2 or less prior to re-treatment. Monitor complete blood counts at baseline and weekly. Perform serum chemistry tests, including renal and hepatic functions prior to the start of the first dose of each cycle. Table 1: Dosage Modifications for Hematologic and Non-Hematologic Toxicities Dosage Modification Dosage Modifications due to Hematologic Toxicities Platelet count ≥ 25 x 10 9 /L and nadir ANC ≥ 0.5 x 10 9 /L No Change Nadir ANC < 0.5 x 10 9 /L (any platelet count) Decrease dosage by 25% (750 mg/m 2 ) Platelet count < 25 x 10 9 /L (any nadir ANC) Dosage Modifications due to Non-Hematologic Toxicities Any CTCAE Grade 3 or 4 adverse reaction ª Decrease dosage by 25% (750 mg/m 2 ) Recurrence of CTCAE Grade 3 or 4 adverse reaction after two dosage reductions Discontinue Beleodaq ªFor nausea, vomiting, and diarrhea, dose modification may not be necessary if the duration is less than 7 days with supportive management 2.3 Recommended Dosage in Patients with Hepatic Impairment Beleodaq dosage in patients with moderate hepatic impairment (total bilirubin > 1.5 to 3 x...

    • Side Effects (Adverse Reactions)

    6 ADVERSE REACTIONS The following clinically significant adverse reactions are described in more detail in other sections of the prescribing information.

  • Hematologic Toxicity [see Warnings and Precautions ( 5.1 )]
  • Infection [see Warnings and Precautions ( 5.2 )]
  • Hepatotoxicity [see Warnings and Precautions ( 5.3 )]
  • Tumor Lysis Syndrome [see Warnings and Precautions ( 5.4 )]
  • Gastrointestinal Toxicity [see Warnings and Precautions ( 5.5 )] The most common adverse reactions (>25%) are nausea, fatigue, pyrexia, anemia, and vomiting. ( 6 ) To report SUSPECTED ADVERSE REACTIONS, contact Acrotech Biopharma Inc at 1-888-292-9617 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch 6.1 Clinical Trials Experience Because clinical trials are conducted under widely varying conditions, adverse reaction rates observed in the clinical trials of Beleodaq may not reflect the rates observed in practice. Adverse Reactions in Patients with Peripheral T-Cell Lymphoma The safety of Beleodaq was evaluated in 129 patients with relapsed or refractory PTCL in the single arm clinical trial in which patients were administered Beleodaq at a dosage of 1,000 mg/m 2 administered over 30 minutes by IV infusion once daily on Days 1 through 5 of a 21-day cycle [see Clinical Studies ( 14 ) ] . The median duration of treatment was 2 cycles (range 1 – 33 cycles). The most common adverse reactions observed in the trial of patients with relapsed or refractory PTCL treated with Beleodaq were nausea, fatigue, pyrexia, anemia, and vomiting [see Clinical Studies ( 14 ) ] . Table 3 summarizes the adverse reactions regardless of causality from the trial in patients with relapsed or refractory PTCL. Table 3: Adverse Reactions Occurring in ≥ 10% of Patients with Relapsed or Refractory PTCL (NCI CTC Grade 1-4) Adverse Reactions Percentage of Patients (%) (N=129) All Grades Grade 3 or 4 All Adverse Reactions 97 61 Nausea 42 1 Fatigue 37 5 Pyrexia 35 2 Anemia 32 11 Vomiting 29 1 Constipation 23 1 Diarrhea 23 2 Dyspnea 22 6 Rash 20 1 Peripheral Edema 20 0 Cough 19 0 Thrombocytopenia 16 7 Pruritus 16 3 Chills 16 1 Increased Blood Lactate Dehydrogenase 16 2 Decreased Appetite 15 2 Headache 15 0 Infusion Site Pain 14 0 Hypokalemia 12 4 Prolonged QT 11 4 Abdominal pain 11 1 Hypotension 10 3 Phlebitis 10 1 Dizziness 10 0 Note: Adverse reactions are listed by order of incidence in the “All Grades” category first, then by incidence in “the Grade 3 or 4” category; Measured by National Cancer Institute Common Terminology Criteria for Adverse Events (NCI-CTCAE) version 3.0 Serious Adverse Reactions Sixty-one patients (47.3%) experienced serious adverse reactions while taking Beleodaq or within 30 days after their last dose of Beleodaq. The most common serious adverse reactions (> 2%) were pneumonia, pyrexia, infection, anemia, increased creatinine, thrombocytopenia, and multi-organ failure. One treatment-related death associated with hepatic failure was reported in the trial. One patient with baseline hyperuricemia and bulky disease experienced Grade 4 tumor lysis syndrome during the first cycle of treatment and died due to multi-organ failure. A treatment-related death from ventricular fibrillation was reported in another monotherapy clinical trial with Beleodaq. ECG analysis did not identify QTc prolongation. Discontinuations due to Adverse Reactions Twenty-five patients (19.4%) discontinued treatment with Beleodaq due to adverse reactions. The adverse reactions reported most frequently as the reason for discontinuation of treatment included anemia, febrile neutropenia, fatigue, and multi-organ failure. Dosage Modifications due to Adverse Reactions In the trial, dosage adjustments due to adverse reactions occurred in 12% of Beleodaq-treated patients. 6.1 Clinical Trials Experience Because clinical trials are conducted under widely varying conditions, adverse reaction rates observed in the clinical trials of Beleodaq may not reflect the rates observed in practice. Adverse...

    • Drug Interactions

    7 DRUG INTERACTIONS UGT1A1 Inhibitors: Avoid use or modify dosage if use is unavoidable. ( 2.6 , 7.1 ) 7.1 UGT1A1 Inhibitors Avoid concomitant administration of Beleodaq with UGT1A1inhibitors. If concomitant use of a UGT1A1 inhibitor is unavoidable, modify the Beleodaq dose [see Dosage and Administration ( 2.6 )] . Belinostat is primarily metabolized by UGT1A1. Concomitant use with a UGT1A1 inhibitor increases belinostat exposure [see Clinical Pharmacology ( 12.3 )] , which may increase the risk of Beleodaq adverse reactions. 7.1 UGT1A1 Inhibitors Avoid concomitant administration of Beleodaq with UGT1A1inhibitors. If concomitant use of a UGT1A1 inhibitor is unavoidable, modify the Beleodaq dose [see Dosage and Administration ( 2.6 )] . Belinostat is primarily metabolized by UGT1A1. Concomitant use with a UGT1A1 inhibitor increases belinostat exposure [see Clinical Pharmacology ( 12.3 )] , which may increase the risk of Beleodaq adverse reactions.

    Contraindications

    4 CONTRAINDICATIONS None None. ( 4 )

    Pregnancy and Breastfeeding

    8.1 Pregnancy Risk Summary Based on its mechanism of action, Beleodaq can cause teratogenicity and/or embryo-fetal lethality because it is genotoxic and targets actively dividing cells [see Clinical Pharmacology ( 12.1 ) and Nonclinical Toxicology ( 13.1 )] . There are no available data on Beleodaq use in pregnant women to evaluate for a drug-associated risk of major birth defects, miscarriage or adverse maternal or fetal outcomes. No animal reproduction studies were conducted with Beleodaq. Advise pregnant women of the potential risk to a fetus. The estimated background risk of major birth defects and miscarriage for the indicated population(s) is unknown. All pregnancies have a background risk of birth defect, loss, or other adverse outcomes. In the U.S. general population, the estimated background risk of major birth defects and miscarriage in clinically recognized pregnancies is 2-4% and 15-20%, respectively.

    Overdosage

    10 OVERDOSAGE No specific information is available on the treatment of overdosage of Beleodaq. There is no antidote for Beleodaq and it is not known if Beleodaq is dialyzable. If an overdose occurs, general supportive measures should be instituted as deemed necessary by the treating physician. The elimination half-life of belinostat is 1.1 hours [see Clinical Pharmacology ( 12.3) ] .

    How Supplied

    16 HOW SUPPLIED/STORAGE AND HANDLING How Supplied Beleodaq (belinostat) for injection is supplied in single vial cartons; each clear vial contains sterile, lyophilized powder equivalent to 500 mg belinostat. NDC 72893-002-01: Individual carton of Beleodaq single-dose vial containing 500 mg belinostat. Storage and Handling Store Beleodaq (belinostat) for injection at room temperature 20°C to 25°C (68°F to 77°F). Excursions are permitted between 15°C and 30°C (59°F and 86°F). Retain in original package until use. [see USP Controlled Room Temperature]. Beleodaq is a hazardous drug.Follow special handling and disposal procedures. 1

    About This Information

    This drug information is sourced from FDA-approved labeling via the openFDA database. It is intended for educational and reference purposes only. This is not medical advice. Always consult your healthcare provider before making decisions about medication. Drug information may be updated by the FDA; check with your pharmacist for the most current information.

    What are side effects?

    Side effects are unwanted reactions that can occur when taking a medication. They range from mild (headache, nausea) to severe (allergic reactions, organ damage). Not everyone experiences side effects, and severity varies. Report any concerning side effects to your doctor.

    What are drug interactions?

    Drug interactions occur when a medication is affected by another drug, food, or supplement. Interactions can make medications less effective or cause dangerous side effects. Always tell your doctor about all medications and supplements you take.